English
Español
To use a tailgate strut motor, follow these steps:
Check the owner's manual for your vehicle to locate the tailgate strut motor and to confirm the correct procedure for accessing it.
Open the tailgate and locate the tailgate strut motor. It is usually located near the top of the tailgate and may be hidden by a plastic cover.
Remove the cover to access the tailgate strut motor. You may need to use a screwdriver or other tool to remove any screws or clips holding the cover in place.
Disconnect the wiring harness from the tailgate strut motor. This will usually involve pressing a release tab and pulling the harness away from the motor.
Remove the old tailgate strut motor by removing any mounting bolts or clips holding it in place.
Install the new tailgate strut motor by reversing the steps you took to remove the old one. Make sure to properly connect the wiring harness and secure the motor with the mounting bolts or clips.
Test the new tailgate strut motor by operating the tailgate and ensuring that it moves smoothly and evenly.
If you are unsure about how to use a tailgate strut motor or are not comfortable performing this task, it is recommended to seek the assistance of a qualified mechanic.
Tel:
Fax:
Phone:
Email:
Add:
